This small pulverizer system has the same patented flexible impactor technology as our larger Andela Pulverizer Systems with our time proven design for making quality glass cullet or aggregate with separation of caps and paper. The pulverized glass will be 3/8″ (10mm) and smaller with rounded edges.

Glass bottles, up to 8″ in diameter, are placed by hand on the infeed conveyor and carried into the pulverizer. The pulverized glass goes directly into the screen to remove the residue (caps, corks and labels). The glass drops into a bin mounted on casters for easy removal from underneath the unit. The residue is separated and deposited into its own, smaller bin under the unit. A dust removal port is provided for a small dust collector that can be attached to alleviate any nuisance dust produced by the process.

The footprint of the unit is approximately 48″ Wide, 57″ Long and 71″ Tall. The shipping weight is approximately 2,000 pounds.

The unit is powered by a single phase, 220 volt, 5HP motor unless otherwise specified. This motor will require a 50 amp breaker in the breaker box that is feeding the power to the unit.

The manufacturer reserves the right to change designs and specifications without notice (06-29-12).

Dimensions

Overall Length Approx. 12 ft
Overall Width Approx. 6 ft
Overall Height Adjustable

Pulverizer

Infeed Hood Opening 23″ x 23″
Machine Input Opening 12″ x 12″
Barrel Diameter and Length 16″ x 34″
Barrel Liner Chromium Carbide
Motor Size 7.5 hp
Solid Steel Shaft Diameter 2″
Numbers of Hammers 28
Hammer Type Flailing Arm/Hardened Steel
Bearing Size 2″ Heavy Duty
Seal Protection 2 Seals at each Shaft Bearing

Trommel

Screen #1 24″ OD x 2′ long, 3/16″ screen opening or to specification.
Screen #2 24″ OD x 2′ long, 7/16″ screen opening or to specification.
Produces 1/8″ minus glass sand, 1/8″-3/8″ glass gravel and 3/8″ plus trash.
Screen Barrel Diameter and Length 24″ x 6′
Screen Type Stainless Steel Woven Wire
Rotating Brushes 7″ Diameter
Motor Size 1 hp

Safety

Protective Guards Cover Input Hopper, Drive Unit, and Bearings
Maintenance Features Central Lubrication Block, External Mount

Electrical

Motor Voltage 230V/460V, 60Hz, 3 Phase (or to customer specifications)
Click any layout to view in new tab

Machine Plan View

click image to open in new tab